(Note: About FN1 is about to be pressed for about 3~5 seconds)Ĭlick the Open Files… button and select the LED_20210202_V1.1.bin file in the directoryĬomplete the upgrade. After inserting the USB-C, do not release FN1 until you see the LED MCU icon on the 'Devices and Printers' page, then let go. Press the FN1 button without letting go, and plug the USB-C cable into the USB-C port with the text 'PC'. Open 'Control Panel' and open 'Devices and Printers'. (Note: About FN2 is about to be pressed for about 1~2 seconds)Ĭlick Connect button, if the connection is successful, Connect will turn green.Ĭlick the Open Files… button and select the Host_20210202_V1.1.bin file in the directoryĬomplete the upgrade.10. After inserting the USB-C, don’t release FN2 until you see the HOSTMCU icon on the 'Devices and Printers' page, then let go. Press the FN2 button without letting go, and plug the USB-C cable into the USB-C port with the text 'PC'. (Note: For the convenience of confirmation, whether windows has recognized the upgrade status of TASOLLER) Open 'Control Panel' and open ' Devices and Printers'. PS: The USB-C interface with the word 'POWER' on TASOLLER can be disconnected or disconnected without affecting the upgrade. Make sure there are the following files in the compressed files:Ĭonfig.ini ( Make sure there is a config.ini file, if the file is missing, the firmware cannot be upgraded）ĭisconnect the USB-C interface with 'PC' written on TASOLLER Modification of light combination keys, in accordance with the instructions Ĭompressed files name: TASOLLER_firmware_20210202_V1.1.zip After 3 seconds, plug and unplug the 'PC' USB-C interface again. Please switch to the next level or the previous level of sensitivity. Under individual sensitivity, if a certain button is always on. Solve the problem that the sensitivity cannot be switched under certain circumstances

Dao download for windows 10